- Construction Materials Agents[1]
- Other Construction Material Making Machinery[10]
- Cement Making Machinery[7]
- Metal Straightening Machinery[15]
- Brick Making Machinery[3]
- Wiring Ducts[4]
- Sand Making Machinery[1]
- Mining Machinery[34]
- Tile Making Machinery[1]
- Charcoal[2]
- Other Machinery[7]
- Umbrella Stands[1]
- Organic Acid[6]
- Pigment[1]
- Alkali[1]
- Personal Watercraft[1]
- Refractory[12]
- Metal Processing Machinery Parts[1]
- Other Metal Processing Machinery[2]
- Metallurgy Machinery[3]
- Cutting and Forming Tools[1]
- Other Woodworking Machinery[1]
- Voltage Regulators/Stabilizers[2]
- Street Lights[1]
- Contact Person : Mr. Wei David
- Company Name : Zhengzhou Hengjun Trading Co., Ltd.
- Tel : 86-371-64393396,63883601
- Fax : 86-371-64387396,63883602
- Address : Henan,Zhengzhou,1416, A Building, Soho Plaza, Nanyang Road
- Country/Region : China
- Zip : 450000
E-crusher fine
Detailed Product Description
This series of products applicable to the metallurgy, mining, building materials, road construction and other industries broken 250MPa compressive strength is less than the various materials. It can be the size of the different raw materials broken into uniform particles in order to facilitate the processing procedure under.
E-breakers referred to as the E-break, the series has broken more than Large, uniform product size, simple structure, reliable, simple maintenance
Then, the cost of operating the economy and so on. E-breaking machine (machine broken jaw) is widely used in mining, metallurgy, building materials, road, rail, water and the chemical industry and other sectors, breaking strength is not more than 320 MPa of a variety of materials.
E-breakers to be used and the scope of:
1, the E Series Breakers (E break) for metallurgy, mining
Hill, chemicals, cement, construction, ceramics and refractories, such as for the industrial sector in broken chronology and in a variety of hard rock and ore used.
2, the series of jaw crusher (broken jaw) is not the most appropriate breaking strength is higher than 300MPa (MPa) of a variety of soft and hard ore, was the largest pieces of broken material shall not be greater than the degree of technical parameters laid down table.
Jaw Crusher working principle:
The series of jaw crusher (broken jaw) work for extrusion-moving song, and its working principle is: motor-driven belt and pulley, so that the eccentric shaft moving up and down movement of the jaw, jaw when moving up when the elbow between the plate and moving jaw Variable angle, so as to promote the move to the fixed jaw jaw plate close to the board, rather than at the same time the material was cut or crushed broken, broken to achieve the purpose; when moving down the jaw, elbow board and move smaller angle of the jaw, jaw moving plate In the bar, the role of the spring, leaving the fixed jaw plate, at this time has broken materials from the cavity under the broken exhaust port. With the motor spinning in a row and broken jaw for motor cycles and the movement crushed waste materials, and mass production.
E-Breakers (small) technical parameters
Type | Electrical facilities | Spindle Speedr/min | WeightT |
PowerKw | |||
PEX150×500 | 11 | 320 | 2.0 |
PEX150×750 | 15 | 300 | 3.5 |
PEX250×750 | 30 | 330 | 5.7 |
PEX250×1000 | 37 | 330 | 6.5 |
PEX250×1200 | 45 | 330 | 8.2 |
